Adjustable 2000 Series Electric Strikes



Light Commercial Strikes


Adjustable Latch Image
2000 Series Adjustable Latch

2000 Series Features:

  • Allows adjustment for wider latch bolts & poorly aligned doors & locksets.
  • 1/8” Horizontal Latch Adjustment.
  • Releases Under Slight Door Pre-Load.
  • 500,000 Life Cycles -- Holding Force - 900 lbs.
  • Solid Cast Latch - Chrome Plated.
  • Non Handed Operation.
  • Screw Terminals - Quick Connection.

2000 Series Electrical Characteristics:

VoltageCurrent/AmpsOhms (Ω)SoundDuty
6-14VAC0.44 - 1.108.5BuzzIntermittent
6-14VDC0.70 - 1.608.5Silent Intermittent
16-24VAC0.22 - 0.3350.0BuzzIntermittent
16-24VDC0.32 - 0.4750.0SilentIntermittent
12VDC0.20 - 0.3360.0Silent Continuous
24VDC0.11 - 0.47120.0SilentContinuous

2001
For use in new or replacement wood or metal jamb installations with locksets having up to 5/8” throw, based on 1/8” door gap.

Face Plate 5-7/8” x 1-1/4” -- Narrow Style Face Plate -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” -- Cavity Height 1-11/16”

Available Finishes: 2001 (Brass Powder Coated) -- 2001C (Satin Chrome or - BHMA652)

Downloadable content:


Trine 2001 Electric Strike

2002
For use in new or replacement aluminum or hollow metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Use with latch bolts having up to 5/8” throw, Based on 1/8” door gap.

Face Plate 7-15/16” x 1-7/16 -- Auxiliary Ramp Height 2-7/8” -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” -- Cavity Height 1-11/16”

Available Finishes: 2002 (Aluminum Powder Coated) -- 2002DB (Dark Bronze finish is DISCONTINUED)
Options: RS (Fail Safe) -- on DC only -- add “RS” to model #

Downloadable content:


Trine 2002 Electric Strike

2002WR
For use in new or replacement aluminum or hollow metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Use with locksets having up to 5/8” throw, based on 1/8”door gap.

Steel Face Plate 7-15/16” x 1-7/16 -- Auxiliary Ramp Height 3-3/8” -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” Cavity Height 1-11/16”

Available Finishes: 2002WR (Aluminum Powder Coated) -- 2002WRDB (Dark Bronze finish is DISCONTINUED)
Options: RS (Fail Safe) -- on DC only -- add “RS” to model #

Downloadable content:


Trine 2002WR Electric Strike

2007
For use in new or replacement installations in metal jambs. Fits a standard 4-7/8” ANSI prep with little jamb modification. Use with locksets having up to 5/8” throw, based on 1/8” door gap.

Steel Face Plate 4-7/8” x 1-1/4” -- Narrow Style Face Plate -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” -- Cavity Height 1-11/16””

Available Finishes: 2007 (Brass Powder Coated) -- 2007C (Satin Chrome -- BHMA652), -- 2007DB (Dark Bronze Powder Coated)
Options: RS (Fail Safe) -- on DC only -- add “RS” to model #

Downloadable content:


Trine 2007 Electric Strike

2009
For use in new or replacement installations in metal jambs. Centerline of the latch is 3/8” below ANSI centerline for offset applications. Fits a standard 4-7/8” ANSI prep with little jamb modification. Use with locksets having up to 5/8” throw, based on 1/8” door gap.

Steel Face Plate 4-7/8” x 1-1/4” -- Narrow Style Face Plate -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” -- Cavity Height 1-11/16”

Available Finishes: 2009 (Brass Powder Coated) -- 2009C (Satin Chrome or - BHMA652
Options: RS (Fail Safe) -- on DC only -- add “RS” to model #

Downloadable content:


Trine 2009 Electric Strike

2012
For use in new or replacement, aluminum or hollow, metal jamb installations with locksets having up to 5/8” throw, based on 1/8” door gap.

Steel Face Plate 4-7/8” x 1-1/4” -- Auxiliary Ramp 3-3/8” -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” -- Cavity Height 1-11/16

Available Finishes: 2012 (Brass Powder Coated) -- 2012C (Satin Chrome or - BHMA652) -- 2012DB (Dark Bronze Powder Coated)
Options: RS (Fail Safe) -- on DC only -- add “RS” to model #

Downloadable content:


Trine 2012 Electric Strike

2678
For use in new or replacement, aluminum or hollow metal, jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Useful when converting an MS Lock to a dead latch. Up to 5/8” throw, based on 1/8” door gap.

Face Plate 6-7/8” x 1-1/4” -- Auxiliary Ramp 3-3/8” -- Mortise Backset 1-9/16” -- Cavity Depth 9/16” -- Cavity Width 5/8” -- Cavity Height 1-11/16”

Available Finishes: 2678 (Satin Aluminum or - BHMA 628) -- 2678-US10 (Satin Bronze -- BHMA 639)
Options: RS (Fail Safe) -- on DC only -- add “RS” to model #

Downloadable content:


Trine 2678 Electric Strike

© 2024 by Trine Access Technology & trineonline.com. All Rights Reserved
 
Privacy Policy | Terms of Use | Sitemap

Axion: Premium Electric Strikes® and Strikeline® are Registered Trademarks of Trine Access Technology. All rights reserved.